This timer was developed primarily for Free Flight Scale models to the specific requirements of Kevin Wallace - the owner of SAMS Models and an aeromodeller of long standing, regularly competiting (and winning) in UK National competitions.

 

Dual Functions:-

  1. The primary function of this timer is to set the profile of the motor run via an ESC (power, run and decay times).
  2. The secondary function is to drive a servo to operate a de-thermaliser mechanism. The motor power is set by a single turn potentiometer and the motor run and d/t periods are set by a simple push button / LED interface.


Key Features:-

  • start delay:- 5 seconds
  • motor soft start:- 3 seconds
  • motor run duration:- adjustable 4 to 30 seconds, set in 2 second increments
  • motor power:- adjustable from zero to full throttle (by potentiometer)
  • power decay:- adjustable 2 to 30 seconds, set in 2 second increments
  • push button immediately stops the motor at any point during the flight profile
  • d/t period:- adjustable 10 to 300 seconds, set in 10 second increments
  • duration settings saved in memory – a single button push serves to repeat a flight.
  • unique CONFIG mode for setting up ESCs without additional equipment (programming card or RX/TX otherwise required)

 

View/Download:

INSTRUCTION MANUAL - SAMS Dual Function Profiler (d/t)

This item is exclusively available from:-